Carve out acres of low end with a selection of the best bass cabinets. Treat yourself to impulse responses from 4 iconic speaker cabinets.
For Redwirez’ 10th anniversary we’ve reimagined our collection with 10 years of customer feedback in mind. Yes! They sound different. They sound better!
What’s New in the Anniversary Edition
•Longer. Now 500ms for better bass definition.
•Smoother. Advanced processing to remove unwanted acoustic artifacts.
•Cleaner. Less noise, better SNR.
•Easier. Presets for commonly used studio techniques.
•Mix ready. IRs sit better in the mix.
Why Redwirez
Each BIGbox cabinet is sampled in systematic way resulting in a “grid” of IRs with small, linear changes between them. Because the samples are predictable you can quickly zero-in on the perfect sound.
You can use the same micing techniques used in a studio because each library is like a real cab. Let’s say that U47 FET a little too boomy, then move it back by an inch or two.
A good bass guitar tone is built with many moving parts. Your setup is unique. Don’t settle for someone else’s idea of good tone. Hone your own.
What You Get
The collection contains: IRs and mixIR³ IR modules. IRs are packaged as WAV audio files in a variety of sample rates. They can be loaded into most any convolution software or hardware.
MixIR³ IR modules are for use with Redwirez mixIR³ only. Each module contains all IRs for a single cabinet in one file. Loading up an IR module in the mixIR³ brings up a point-and-click visual interface for selecting mics and mic position. Modules also provide controls for tweaking the cabinet’s impedance curve and bass response.
The mixIR³ plug-in is not included with the BIGbox Bass library.
IR Features
•4 iconic speaker/cabinets used on some of the greatest recordings EVER
•Sampled with 15 industry-standard microphones, each with their own special sound
•Up to 6 mic positions to dial in the right tone for your amp
•9 different mic distances for different amounts of proximity effect, cabinet and roominess
•500ms IRs packaged in common sample rates: 44.1, 48, 88.2, 96kHz
•Aligned for better phase coherence. Mix multiple cabs and mics without comb filtering.
•Uncompromising signal chain. Cabs driven by a super-clean power amp, captured with classic Neve preamps and top-notch converters.
•Compatible with a wide range of recording software and hardware. If your plug-in or device can load a WAV file then it is likely compatible.
mixIR³ Module Features
•Exclusively for the Redwirez mixIR³
•All current Redwirez cabs can be loaded as modules into the mixIR³
•Navigate a virtual 3D cab to visually sculpt your tone
•Accurately model tube amp and speaker interaction with cab-specific impedance curves.
•Equal loudness compensation. Constant level across IRs so you can make decisions based on tone not volume.
Speaker Cabinets Included
Ampeg B15 1×15
(1) JBL D140
Ampeg B15 “Fliptop” with a JBL D140 speaker. Channel the Motown sound. Details…
Ampeg SVT 810 8×10
(8) SVT 10s
SVT 810 with stock SVT 10″ speakers (86-032-01). Details…
Aguilar DB115 1×15
(1) Aguilar 15″
Aguilar DB115 with a stock 15″ speaker. Lots of definintion and ample low-end without sounding boomy. Details…
Hartke 4.5XL 4×10+5
(4) Hartke Aluminum 10s
Hartke 4.5XL with aluminum Hartke 10″ speakers and a center-mounted 5″ driver. The aluminum drivers give you a bright, punchy sound. We sampled the 10″ speakers and the 5″ high-end driver independently, so you can blend to taste. The 5″ speaker IRs are in the TC30 folder and labeled with “5inC”.Details…
Microphones Included
We experimented with a wide range of microphones before we settled on a final lineup. So, not every mic was used on every cabinet. Check the Details link for each cab for a listing of the mics used on that cabinet.
•AKG D12
•AKG D112
•Audix D6
•Beyerdynamic M380N
•Coles 4038
•Earthworks TC30
•Electrovoice RE20
•Heil PR40
•Neumann U47FET
•Royer R121
•Sennheiser e602
•Sennheiser MD421
•Shure Beta52
•Shure SM7
•Shure SM57
挑选最好的低音箱体，开拓出一亩低端。善待自己，以冲动来自4个标志性音箱的响应。
在Redwirez成立10周年之际，我们考虑了10年的客户反馈来重新设计我们的产品系列。是! 他们听起来不一样。他们听起来更好!
周年纪念版中的新功能
•更长。现在为500ms，以获得更好的低音清晰度。
•更顺滑。先进的处理技术可消除不必要的声学伪影。
•清洁器。噪音少，信噪比更好。
•更轻松。常用演播室技术的预设。
•混合就绪。投资者关系在组合中坐得更好。
为什么选择Redwirez
每个BIGbox机柜都以系统的方式进行采样，从而生成一个“网格”的IR，它们之间的线性变化很小。由于采样是可以预测的，因此您可以快速调入理想的声音。
您可以使用演播室中使用的麦克风技术，因为每个库都像一个真正的出租车。假设U47 FET有点过于忙碌，然后将其移回一英寸或两英寸。
良好的低音吉他音色带有许多活动部件。您的设置是唯一的。不要满足于别人的好心情。自己磨练。
你得到什么
该集合包含：IR和mixIR³IR模块。IR以各种采样率打包为WAV音频文件。它们可以加载到大多数任何卷积软件或硬件中。
MixIR³IR模块仅与RedwirezmixIR³一起使用。每个模块在一个文件中包含单个机柜的所有IR。在mixIR³中加载IR模块后，会弹出一个点击式视觉界面，用于选择麦克风和麦克风位置。模块还提供用于调整音箱阻抗曲线和低音响应的控件。
BIGbox Bass库不包含mixIR³插件。
红外功能
•4个标志性的扬声器/音箱用于有史以来最出色的录音
•配有15个行业标准麦克风，每个麦克风都有自己的特殊声音
•多达6个麦克风位置，可为您的放大器拨出正确的音调
•9种不同的麦克风距离不同程度的邻近效果，机柜和空间
•500ms的IR以常见的采样率打包：44.1、48、88.2、96kHz
•对齐以实现更好的相位相干性。混合多个驾驶室和麦克风，而不进行梳状滤波。
•毫不妥协的信号链。由超净功率放大器驱动的驾驶室，由经典的Neve前置放大器和一流的转换器捕获。
•兼容多种录音软件和硬件。如果您的插件或设备可以加载WAV文件，则可能兼容。
mixIR³模块功能
•专门用于RedwirezmixIR³
•可以将所有当前的Redwirez驾驶室作为模块加载到mixIR³中
•导航虚拟3D驾驶室以直观地雕刻您的音调
•通过驾驶室特定的阻抗曲线准确地模拟电子管放大器和扬声器的相互作用。
•等响度补偿。各个IR的电平恒定，因此您可以根据音调而不是音量做出决策。
随附音箱
Ampeg B15 1×15
(1)JBL D140
带JBL D140扬声器的Ampeg B15“ Fliptop”。引导Motown声音。细节…
Ampeg SVT 810 8×10
(8)SVT 10s
SVT 810，带有库存的SVT 10“扬声器(86-032-01)。详细信息…
Aguilar DB115 1×15
(1)Aguilar 15英寸
Aguilar DB115，带有备用15英寸扬声器。许多定义和足够低端，但听起来不那么热闹。细节…
Hartke 4.5XL 4×10 + 5
(4)Hartke铝制10s
Hartke 4.5XL，带有铝制Hartke 10“扬声器和中央安装的5”驱动器。铝制驱动器给您明亮，强劲的声音。我们分别采样了10英寸扬声器和5英寸高端驱动器，因此您可以融合口味。5英寸扬声器IR位于TC30文件夹中，并标有“ 5inC”。详细信息…
内含麦克风
在确定最终阵容之前，我们尝试了各种麦克风。因此，并不是每个麦克风都用在每个机柜上。检查每个驾驶室的详细信息链接，以获取该机柜上使用的麦克风的列表。
